• Pack specially designed for easy installation 
  • Delivered with a detailed installation diagram (including electrical wire sizes, etc.)
• LiFePO4 Lithium Battery with BMS and Bluetooth connectivity included (100 / 200 / 314 Ah to choose from)
• Optional 12V → 230V Inverter (600 to 2,000 W) — R10-certified with integrated 20A AC/DC charger and automatic bypass
• Victron components: Victron Orion-TR Smart 12-12 / 30A DC/DC charger + Victron SmartSolar MPPT 100/30 solar controller
• CE / R10 certified — compatible with VASP registration
• Free technical support during installation
• Expandable system (add panels/230V later) and repairable (component by component)

🧩 Choose the right kit

Two important points for choosing the right kit:

• The battery capacity : affects the length of time you can remain self-sufficient.
• The capacity of the 230V-12V inverter: is determined by the power rating of the 230V appliance (or appliances) you want to use: the higher the appliance's required power, the more powerful the inverter you will need

1️⃣ Your autonomy (LiFePO4 Lithium battery)

• 100 Ah — basic use
• 200 Ah — regular autonomy
• 314 Ah — intensive 230V use or long-lasting autonomy

2️⃣ The 230V supply (mains outlets), depending on your devices

• Without 230V — Without an inverter
• 600 W — laptop and small, low-energy 230V devices
• 1,000 W — a small 230V accessory such as a mini microwave
• 1,500 W — a powerful appliance such as a kettle of around 1,200 W
• 2,000 W — several devices at the same time (coffee maker + microwave…)

The inverter includes a 20A AC/DC charger and an automatic bypass: when connected to mains power (campsite, 230V parking area), it powers your devices AND recharges the battery, with no manual intervention.

👉 Not sure about your setup? Our team can also assemble a custom pack for you — contact us.

⚡ Components included in the pack

• LiFePO4 Lithium Battery with BMS and Bluetooth connectivity — 100 / 200 / 314 Ah (depending on your choice)
• Optional 12V → 230V Inverter — Vanlife Easy - R10-certified from 600 to 2,000 W with integrated 20A AC/DC charger (automatic bypass)
• Victron Orion-TR Smart 12-12 / 30A DC/DC charger: recharges the battery while driving via the alternator
• Victron SmartSolar MPPT 100/30 MPPT solar charge controller: compatible with 300 to 500 W panels (standard domestic panels)
• Distribution box + switches — switch panel system with charging sockets + 12V fuse holder
• Battery disconnect switch + fuse + electrical terminal kit
• Detailed electrical diagram + step-by-step tutorial

🔧 Easy installation, even for beginners

• Electrical diagram included — a clear plan for safe installation
• Pre-sized components — no calculations required
• Technical support from our team during installation

🛡️ Reliable, safe and eligible for VASP approval

• Certified CE / R10 components — compatible with VASP approval (France)
• Complete electrical protection (battery disconnect switches, fuses)
• Expandable system (add panels/230V later) and repairable (component by component)

📦 To be provided — not included

• Electrical wires (the length depends on your layout)
• Solar panels 300 to 500 W (compatible with standard domestic panels)

⁉️ Frequently asked questions

Any other questions? Contact our technical team.

Q: Which battery should I choose?
A: 100 Ah for weekends, 200 Ah for regular use over several days and a small inverter, 314 Ah for full-time van living and/or a high-capacity inverter.

Q: Do I need 230V?
A: Only if you use mains-powered appliances (coffee maker, microwave, induction hob, etc.). Otherwise, choose “Without 12V-230V inverter” — you can add an inverter later.

Q: What is the automatic bypass?
A: When connected to mains power (campsite, 230V parking hookup), the inverter powers your 230V appliances and recharges the battery simultaneously and automatically. No handling required, no risk of error.

Q: Need more than 2,000 W (induction hob, air conditioner)?
A: Contact our team for a custom quote with a higher-capacity inverter.

Q: Compatible with a VASP registration document?
A: Yes. All components are CE / R10 certified and comply with VASP requirements in France.