Sliding window SQUARE SLIDE 700 x 300 - with window blind and mosquito net

The SQUARE SLIDE sliding window has square corners and dark-tinted double glazing, an aluminium frame and a central lock, and is ECE R43 approved. It fits walls from 30 to 55 mm thick. Delivered complete: blackout blind, fly screen and aluminium mounting frame included.

Choosing the right size

This window measures 700 × 300: these are the cut-out dimensions, meaning an opening 700 mm wide by 300 mm high. This is the only measurement that determines compatibility with your vehicle. Other dimensions are available on the SQUARE SLIDE Sliding window product page.

Maximum recommended Cut-out dimensions by van (in mm)

* 450 mm on Master, Movano, NV400; 520 mm on Ducato, Jumper, Boxer, Sprinter, Crafter.

These values correspond to what the vehicle allows: the SQUARE SLIDE is available up to 1200 × 500.

Reinforcements vary depending on the year and model: mark out the cut-out on your wall and check that no reinforcement, cable or conduit runs through it. If in doubt, send us a photo and we will confirm.

The outer frame extends 3 cm on each axis (overall dimensions: W + 3 cm × H + 3 cm).

💡 Good to know: the interior finishing frame is mounted proud of the wall. It covers the edges of the cut-out without requiring additional space.

Benefits of the SQUARE SLIDE sliding window

• The look of the square corners: clean, straight lines that complement the flat sides of vans and modern interiors.
• Privacy: the dark-tinted glazing (30% light transmission) keeps the interior sheltered from prying eyes without making it dark.
• Double glazing: two UV-resistant acrylic panes that insulate far better than single glazing. The interior stays cooler in summer, warmer in winter, and condensation is reduced.
• Ventilation without taking up space: the glazing slides within the frame instead of opening outwards, and locks securely with the central lock.
• A complete window: blackout blind, fly screen, inner frame and fixings are included. No accessories to order separately.
• A sturdy structure: a reinforced aluminium inner frame presses it against the wall, whether curved (van) or flat (Motorhome, caravan).
• Easy installation: the step-by-step installation tutorial guides you from marking out the cut-out to final tightening. Allow approximately 1 hour.
• Approved and durable: ECE R43 approval, 2-year warranty and spare parts available for 5 years.

Choose the right model

Prefer rounded corners? See the SLIDE (dark tint) and the SLIDE LIGHT (double glazing, light tint).

Package contents

In the box

• 1 × SQUARE SLIDE window
• 1 × Reinforced aluminium inner frame
• 1 × Interior finishing frame with integrated blackout blind and fly screen
• 1 × Complete fixings set
• 1 × Step-by-step installation tutorial

What you will need

• 1 tube of Sikaflex 265 per window
• Wooden battens or frame at least 25 mm thick (recommended for panel vans)
• Jigsaw and screwdriver

Allow approximately 1 hour for installation. Have two people available to position the window in the cut-out and hold it during screwing.

Downloads

• Installation instructions (French PDF)
• Window selection guide (PDF, available in 6 languages)

Frequently asked questions

Q: Is it compatible with curved van walls?
A: Yes. The reinforced aluminium inner frame adapts equally well to curved walls (vans) and flat walls (Motorhomes, caravans). Any slight gap on a curved wall is filled with Sikaflex.

Q: Is it approved for use on the road?
A: Yes, ECE R43: installation is authorised without manufacturer approval in Europe, the United Kingdom and Switzerland. Compliant with roadworthiness inspections and VASP requirements.

Q: Can I replace an existing window?
A: Yes, if the existing cut-out matches one of our dimensions. Measure the cut-out in the wall, not the visible frame of the old window. Pay attention to the corners: the SQUARE SLIDE has square corners. For a cut-out with rounded corners, choose the SLIDE.

Unsure about the size? Contact our technical team; we will reply within 24 hours.

Our France-based technical support team can help in 6 languages (FR / EN / DE / ES / NL / IT), Monday to Friday, 10am to 5pm:

• By email: clients@vanlife-store.com
• By phone: +33 1 89 48 06 01
• Live chat