Sliding window SLIDE LIGHT (Dimensions for rear door L2H2 -> L4H3)

The SLIDE LIGHT sliding window has rounded corners and light-tinted double glazing, a black aluminium frame and a central lock, and is ECE R43 approved. It fits walls from 30 to 55 mm thick. Delivered complete: blackout blind, fly screen and aluminium mounting frame included.

Choosing the right size

The selector shows the interior dimension, i.e. the cut-out to make in the wall.

Maximum recommended Cut-out dimensions by Van (in mm)

* 450 mm on Master, Movano, NV400; 520 mm on Ducato, Jumper, Boxer, Sprinter, Crafter.

Reinforcements vary depending on the year and model: mark the cut-out on your wall and check that no reinforcement, cable or conduit passes through it. If in doubt, send us a photo and we will confirm.

The exterior frame extends 3 cm along each axis (overall dimensions: W + 3 cm × H + 3 cm).

💡 Good to know: the finishing interior frame is installed proud of the wall. It covers the edges of the cut-out without requiring additional space.

The light tint: 70% light transmission, keeping the interior bright while maintaining privacy from outside.

A complete window: blackout blind, fly screen, interior frame and fixings are included. No accessories need to be ordered separately.

• A sturdy structure: a reinforced aluminium interior frame braces it against the wall, whether curved (van) or flat (Motorhome, caravan).
• Easy installation: the step-by-step installation tutorial guides you from marking the cut-out to final tightening. Allow approximately 1 hour.
• Approved and durable: ECE R43 certificate supplied, 2-year warranty and spare parts available for 5 years.
• Choose the right model
• Would you prefer dark glazing or square corners? See the SLIDE (dark tint) and the SQUARE SLIDE (square corners).
• Package contents

In the box

• 1 × SLIDE LIGHT Window
• 1 × Reinforced aluminium interior frame
• 1 × Finishing interior frame with integrated blackout blind and fly screen

1 × Complete set of fixings

1 × Step-by-step installation tutorial

• 1 × ECE R43 approval certificate
• What you will need
• 1 tube of Sikaflex 265 per window
• Wooden battens or frame at least 25 mm thick (recommended for panel vans)

Jigsaw and screwdriver

• Allow approximately 1 hour for installation. We recommend having two people to position the window in the cut-out and hold it in place while tightening the screws.
• Downloads
• Step-by-step installation tutorial (PDF, 6 languages)
• Manufacturer's installation instructions (French PDF)
• ECE R43 approval certificate (PDF)
• Window selection guide (PDF, available in 6 languages)

Why choose the SLIDE LIGHT sliding window?

The double glazing: two UV-resistant acrylic panes that provide much better insulation than single glazing. The interior stays cooler in summer, warmer in winter, and condensation is reduced.

Frequently asked questions

Q: Is it compatible with the curved walls of vans?
A: Yes. The reinforced aluminium interior frame adapts equally well to curved walls (vans) and flat walls (Motorhomes, caravans). Any slight gap on a curved wall is filled with Sikaflex.

Q: Is it approved for road use?
A: Yes, ECE R43: installation is authorised without manufacturer approval in Europe, the United Kingdom and Switzerland. It complies with roadworthiness testing and VASP requirements.

Q: Can I replace an existing window?
A: Yes, if the existing cut-out matches one of our dimensions. Measure the cut-out in the wall, not the visible frame of the old window. Pay attention to the corners: SLIDE LIGHT has rounded corners. For a square-cornered cut-out, choose SQUARE SLIDE.

Unsure about the size? Contact our technical team; we will reply within 24 hours.

Our France-based technical support team can help in 6 languages (FR / EN / DE / ES / NL / IT), Monday to Friday, 10am to 5pm:

• By email: clients@vanlife-store.com
• By phone: +33 1 89 48 06 01
• Live chat