Window guide

View the full guide →

A question? Contact our technical team →

ECE R43 approvedWalls 30–55 mm (extendable)Blind + flyscreen included7 ranges · 172 sizes

1Your maximum cut-out

Van Side wall Rear door
L1H1 700 × 400 500 × 350
L2H2 970 × 520 500 × 520
L3H3 / L4H3 1100 × 550 500 × 520

Cut-out in mm (W × H): choose the size equal to or smaller.

Sprinter, Crafter, Master, Movano or NV400?
  • Sprinter / Crafter: L2H2 = row L3H3.
  • Master, Movano, NV400: rear door limited to 450 mm.
  • Reinforcements vary: measure, or send us a photo.

2Measure your wall

Van side wall with the maximum flat width and height marked
The largest flat rectangle between the reinforcements: max W × max H.
Maximum cut-out(max W − 3 cm) × (max H − 3 cm)

Product title = cut-out. The frame overlaps by 1.5 cm on each side, on flat panel.

3Choose your range

Top-hinged · 70° opening

Sliding · no swing clearance

Curved side wall: flat or curved?

A curved van wall (radius ≈ 5,000 mm) leaves about 5 mm at the ends with a flat pane, filled with Sikaflex 265. The CURVE, on the other hand, sits flush. Motorhome, caravan, rear door: flat wall.

Flat window CURVE window 5 mm 0 mm 5 mm Sikaflex 265 INT. EXT. 0 mm 0 mm 0 mm INT. EXT.
Cross-section: flat pane on the left, CURVE on the right.

Versions window only (without blind or flyscreen): SHADE, LIGHT, CURVE.

A question? Contact our technical team — Monday to Friday, 10 am–5 pm.